[Back]Home > News > Pipe Knowledge

  • Introduction of Slip-on Flange

    Date:2016-09-23      View(s):1443      Tag:pipe flange, slip on flange, slip-on flange

    The calculated strength from a Slip On flange under internal pressure is of the order of two-thirds that of Welding Neck flanges, and their life under fatigue is about one-third that of the latter....

  • What is Socket Weld flange?

    Date:2016-09-22      View(s):1764      Tag:pipe flange, socket weld pipe flange

    Socket Weld flanges were initially developed for use on small-size high pressure piping. ...

  • Lap Joint Flange and Stub End

    Date:2016-09-21      View(s):2364      Tag:pipe flange, lap joint flange, stub end

    Lap Joint Flanges have all the same common dimensions as any other flange named on this page however it does not have a raised face, they used in conjunction with a "Lap Joint Stub End". ...

  • What is Threaded Flange?

    Date:2016-09-20      View(s):1307      Tag:pipe flange, threaded flange, pipe fittings and flange

    Threaded Flanges are used for special circumstances with their main advantage being that they can be attached to the pipe without welding. ...

  • What is Blind Flange?

    Date:2016-09-19      View(s):1366      Tag:flange, blind flange, butt weld flange

    Blind Flanges are manufactured without a bore and used to blank off the ends of piping, Valves and pressure vessel openings. ...

  • What is Welding Neck Flange?

    Date:2016-09-18      View(s):1574      Tag:welding neck flange, pipe flange, steel pipe flange

    Welding Neck Flanges are easy to recognize at the long tapered hub, that goes gradually over to the wall thickness from a pipe or fitting....

  • Spiral Welded Pipe Production and Use

    Date:2016-09-11      View(s):1355      Tag:spiral welded pipe, spiral welded steel pipe, carbon steel spiral welded pipe

    SSAW steel pipe often there will be some quality problems in the production and use, affecting normal use in some aspects, the need for spiral welded pipe to identify the quality...

  • Difference between Black Steel Pipe and Galvanized Steel Pipe

    Date:2016-09-10      View(s):1396      Tag:black steel pipe, galvanized steel pipe

    Black steel pipe and galvanized steel pipe are the two most common kind of pipe applied to transport liquid and gas. ...

  • High Preesure Steel Pipe

    Date:2016-09-08      View(s):1380      Tag:high pressure steel pipe, high pressure seamless pipe

    High pressure steel pipe is used to manufacture steel pressure vessel and pipeline quality carbon steel, alloy steel and stainless steel seamless pipe....

  • CS Steel Pipe Classfication

    Date:2016-08-29      View(s):1343      Tag:cs steel pipe, carbon steel pipe, steel pipe classification

    carbon steel pipe classification...

  • MS and GI Pipe Difference

    Date:2016-08-26      View(s):1287      Tag:ms steel pipe, mild steel steel pipe, gi pipe, galvanized iron pipe

    Galvanized iron pipes commonly used on water pipe lines, it is dipped into zinc for corrosion protection...

  • Storage of Steel Tube

    Date:2016-08-24      View(s):1418      Tag:steel tube, carbon steel tube, erw steel tube, seamless steel tube

    ipe may not be directly stacked on the floor, steel or concrete surface, the first layer of steel pipe from the ground at a distance not less than 0.20m....

  • Checking Flanges Regularly

    Date:2016-08-23      View(s):1439      Tag:flange, pipe fitting

    Flange connection refers to the two pipe, pipe fittings or equipment, the first of their fixed in a flange plate, the two flange, with the pad, with bolts to fasten them together, complete the connection....

  • What is Seam Pipe

    Date:2016-09-17      View(s):1377      Tag:seam pipe, seam steel pipe, steel pipe with seam

    seam pipe refers to the strip or plate bending round, square and other shapes and then welded into the surface jointed pipe. Seam pipe is using a blank plate or strip....

  • Disadvantages of Hot Rolled Steel

    Date:2016-08-18      View(s):1479      Tag:hot rolled steel, hot rolled steel pipe

    First,after hot rolling, steel internal non-metallic inclusions (mainly sulfides and oxides, and silicate) is pressed into thin slices, delamination (interlayer) phenomenon....

Page:  1 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
Products Category